Pass Exam Questions Efficiently With 300-815 Questions (2024)
300-815 Questions - Truly Beneficial For Your Cisco Exam
NEW QUESTION # 46
The company Cisco UCM cluster has two different gateways for off-net calls. The current configuration uses 9 as a prefix to get to the main gateway. The secondary gateway is for any calls that start with 9713, but this is not yet configured. The admin does not want to add more route patterns other than the current 9 prefix for the gateway to the Cisco UCM. How must the Cisco UCM be configured to meet the requirements?
- A. Configure a Route Group and a Route List to send calls with prefix 9713 to the secondary gateway.
- B. Create a Standard Route Group to dynamically route calls with prefix 9713 to the secondary gateway.
- C. Configure two CSSs, then add a translation pattern with the secondary CSS to send calls with
9713 to the secondary gateway. - D. Configure two partitions and two CSSs, then add a translation pattern with the secondary CSS to send all calls with 9713 to the secondary gateway.
Answer: C
NEW QUESTION # 47
Refer to the exhibit.
Calls incoming from the provider are not working through newly set up Cisco Unified Border Element. Provider engineers get the 404 Not Found SIP message. Incoming calls are coming from the provider with called number "222333444" and Cisco Unified Communications Manager is expecting the called number to be delivered as "444333222". The administrator already verified that the IP address of the Cisco Unified CM is set up correctly and there are no dial peers configured other than those shown in the exhibit. Which action must the administrator take to fix the issue?
- A. Change the destination-pattern on the outgoing dial peer to match "444333222".
- B. Create specific matching for "222333444" on the incoming dial peer.
- C. Fix the voice translation-rule to match specifically number "222333444" and change it to "444333222".
- D. Set up translation-profile on the incoming dial peer to match incoming traffic.
Answer: D
NEW QUESTION # 48
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. Accept Audio Codec Preferences in Received Offer must be set to On.
- B. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- C. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
- D. Early Offer for G Clear Calls must be enabled.
Answer: C
NEW QUESTION # 49
Which two statements about Cisco Unified Communications Manager Extension Mobility are true? (Choose two.)
- A. A device can adopt a user profile even when no user is logged in.
- B. After an autogenerated device profile is created, you can associate it with one or more users.
- C. An autogenerated device profiles can be loaded on a device at the same time as a user profile.
- D. Devices can be configured to allow more than one user to be logged in at the same time.
- E. A device profile has most of the same attributes as a physical device.
Answer: A,E
NEW QUESTION # 50
Which three CLI commands are used when configuring H.323 call survivability for all calls?
(Choose three.)
- A. transfer-system
- B. call-router h323-annexg
- C. telephony-service
- D. h323
- E. call preserve
- F. voice service voip
Answer: D,E,F
NEW QUESTION # 51 
Refer to the exhibit. An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer's carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)
- A. Enable the supplementary-service media-renegotiate command.
- B. Enable Mid-Call Signaling Consumption.
- C. Enable Early Offer on the Cisco Unified Border Element.
- D. Enanle PRACK.
- E. Enable Media Flow Around
Answer: C,D
Explanation:
Section: Cisco Unified Border Element
NEW QUESTION # 52
An engineer is implementing survivability for a collaboration environment. The environment is utilizing a centralized Cisco UCM at the headquarters and Cisco IOS-XE gateways in the remote branches. Which action must the engineer take to enable both shared lines and B-ACD for SIP branch phones during a WAN outage?
- A. Configure mode esrst under voice service voip configuration mode.
- B. Configure mode esrst under telephony-service configuration mode.
- C. Configure mode srst under telephony-service configuration mode.
- D. Configure mode esrst under voice register global configuration mode.
Answer: D
NEW QUESTION # 53
Refer to the exhibit.
A no-way audio situation was experienced after the calling party on an outbound call placed the call on hold and then resumed from hold. Which action will resolve the issue?
- A. Upgrade the Cisco Unified Border Element to 15.2.
- B. Upgrade the Cisco Unified Border Element device.
- C. Assign an MTP to the SIP trunk.
- D. Restart the SIP trunk on Cisco UCM.
Answer: A
NEW QUESTION # 54
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?
- A. hunt pilot
- B. line group
- C. hunt list
- D. route group
Answer: A
Explanation:
https://community.cisco.com/t5/ip-telephony-and-phones/call-alerting-on-hunt-group-as-shared- line/td-p/2658015
NEW QUESTION # 55
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- B. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
- C. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
- D. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
Answer: D
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/taking-sip-call-trace-on-cisco-unified- cm-using-rtmt/ta-p/3161200
NEW QUESTION # 56
Refer to the exhibit. A company needs to ensure that all calls are normalized to + E164 format.
Which configuration will ensure that the resulting digit string +14085554001 is created and will be routed to the E.164 routing schema?
- A. Calling Party Transformation Mask of +14085554XXX
- B. Called Party Transformation Mask of +14085554XXX
- C. Calling Party Transformation Mask of +1408555XXXX
- D. Called Party Transformation Mask of +1408555[35]XXX
Answer: B
NEW QUESTION # 57
Single number reach call phone that not answered are leaving voicemails on the cell phone rather the corporate mailbox. Which two options will resolve this issue? (Choose two.)
- A. Check the Enable Extend and Connect checkbox
- B. Decrease the Answer Too Late timer.
- C. Decrease the T302 timer
- D. Decrease the T301 timer Decrease the Answer Too Late timer
- E. Check the Enable Unified Mobility features checkbox
- F. Decrease the T301 timer.
Answer: B,E
NEW QUESTION # 58
An engineer is configuring a Cisco UCM solution. The requirements state that some users in one location will receive calls from a number during work hours 09AM to 5PM, and another group will get the calls from the same number outside this defined timeslot. Users will also change the outgoing number when reaching out to customers based on the same time-of-day routing rules.
Which feature is needed to allow for this type of configuration?
- A. route lists
- B. partitions
- C. route groups
- D. CSS
Answer: D
NEW QUESTION # 59
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C. Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- B. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- C. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- D. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- E. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
Answer: D,E
NEW QUESTION # 60
Refer to the exhibit. An administrator troubleshoots an issue where each user's 4-digit directory number is presented as the calling number when dialing out to the PSTN. This 4-digit calling number prevents the external user from calling the internal user back. Which two actions must the administrator perform to resolve the issue? (Choose two.)
- A. Update the SIP profile on the SIP trunk by checking "enable external presentation name and number"
- B. Create a calling party transformation patter that matches the desired directory number and add a mask to modify the calling number
- C. Create a called party transformation pattern that matches the desired directory number and add a mask to modify the calling number
- D. Add a calling party transformation CSS to the SIP trunk.
- E. Change the calling line ID presentation on the SIP trunk to allow.
Answer: B,D
NEW QUESTION # 61
Refer to the exhibit.
DN 1003 was the last to ring during the most recent call. Which hunting method ensures that DN 1005 is presented with the next call when the hunt pilot is dialed?
- A. call-blast
- B. parallel
- C. peer
- D. sequential
Answer: C
NEW QUESTION # 62
A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?
- A. Create the default device profiles for all phone models that are used.
- B. Assign the extension as a mobile extension.
- C. Subscribe the phone to the Cisco Extension Mobility service.
- D. Create the end user and associate it to the device profile.
Answer: C
Explanation:
Section: Mobility
Explanation/Reference:
NEW QUESTION # 63
......
Cisco 300-815 (Implementing Cisco Advanced Call Control and Mobility Services) Exam is designed to test the knowledge and skills of IT professionals who are involved in implementing advanced call control and mobility services solutions using Cisco technologies. 300-815 exam is one of the requirements for obtaining the Cisco Certified DevNet Specialist - Collaboration Automation and Programmability certification.
To prepare for the exam, Cisco offers a range of training courses and resources, including instructor-led training, e-learning, and self-paced learning. Candidates can also access Cisco's online community, which provides access to study groups, discussion forums, and other learning resources.
Truly Beneficial For Your Cisco Exam: https://lead2pass.real4prep.com/300-815-exam.html