Network Appliance NS0-516 Certification Exam Dumps with 180 Practice Test Questions
New NS0-516 Exam Dumps with High Passing Rate
NetApp NS0-516 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Price | $150 USD |
| Passing Score | 75% |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Number of Questions | 60 |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
NEW QUESTION 97
What is the total number of ALUA paths from the host to a volume on the EF280 that is shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 98
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Reinitialize the FC switch
- B. Swap out the FC cable
- C. Swap out the SFP in the controller port
- D. Move the connection to another controller port
- E. Swap out the HBA on the FC switch
Answer: A,B,C
NEW QUESTION 99
Which three methods can be used to increase the space available to clients? (Choose three.)
- A. Fill empty drive slots in the array
- B. Increase volume segment size
- C. Create new volume groups from unconfigured capacity
- D. Convert RAID-6 volume group to RAID-5
- E. Replace some HDD with SSD
Answer: A,B,C
NEW QUESTION 100
A customer is configuring an EF570 system on an internal network. Due to security concerns, the network does not have Internet access. The customer wants to regularly send standard support data to NetApp.
In this scenario, what should the customer do to accomplish this task?
- A. Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.
- B. Set up a script to initiate Collect Support Data, remove the extra log files, manually move the data to a server with Internet access, and then send the data to NetApp.
- C. Set up a script to initiate Collect Support Data on a set interval, manually move the data to a server with Internet access, and then send the data to NetApp.
- D. Open a support ticket with NetApp to enable AutoSupport local functionality, manually move the data to a server with Internet access, and then send the data to NetApp.
Answer: A
NEW QUESTION 101
What is the 'base' host connectivity provided by the E5400 Controller? (Choose the best answer.)
- A. iSCSI
- B. None
- C. IB
- D. FC
- E. SAS
Answer: D
NEW QUESTION 102
A junior administrator recently made changes to an E-Series system. As a result of these changes, the management host lost the ability to manage the E-Series system through in-band management, but the host still has access to the E-Series data volumes.
In this scenario, what caused this issue?
- A. The ownership of the management host's volumes changed
- B. The access volume was un-mapped
- C. Auto Load Balancing was disabled
- D. The management IPs were changed
Answer: D
NEW QUESTION 103
Which data protection strategy has the most overhead capacity as a percentage of the total capacity?
- A. RAID 6
- B. RAID 5
- C. Dynamic Disk Pools (DDP)
- D. RAID 10
Answer: B
NEW QUESTION 104
An administrator is asked to create an asynchronous mirroring environment that supports multiple mirroring relationships, each with different recovery point objectives (RPOs).
In this scenario, how does the administrator create this environment?
- A. The administrator creates multiple mirror consistency groups with the appropriate RPOs
- B. The administrator creates a mirror group with the appropriate RPOs
- C. The administrator creates multiple mirror pairs, each with their own schedule and RPO
- D. The administrator creates a single consistency group with multiple RPOs
Answer: B
NEW QUESTION 105
Which two errors would fail a pre-upgrade health check? (choose two.)
- A. An excess number of event log events are present
- B. I/O is being processed
- C. Volumes are reported on a non-preferred path
- D. Hot spares are in use
Answer: A,D
NEW QUESTION 106
A customer needs a system for a new solution that they are designing. They have provided you with the performance and capacity requirements.
In the NetApp Fusion UI, which workflow should you perform to help the customer?
- A. Modify Existing Storage
- B. Design a System Manually
- C. Size and Recommend
- D. Perform a Tech Refresh
Answer: C
NEW QUESTION 107
What is the 'base' host connectivity provided by the E2600 controller? (Choose the best answer.)
- A. iSCSI
- B. FC
- C. None
- D. IB
- E. SAS
Answer: E
NEW QUESTION 108
A company has just installed a NetApp EF600 storage array with an initial drive count of 12. A disk pool is created using all 12 disks. Benchmark testing now shows that system performance is far less than expected. Metrics show a very unbalanced use of the two PcIe busses and drives.
In this scenario, which action addresses this problem?
- A. Build two equally sized pools during disk pool creation.
- B. Adjust cache block sizes to 8k.
- C. Insert six drives into the first 12 slots and six drives into the last 12 slots.
- D. Dynamically convert the volumes from RAID 10 to RAID 5.
Answer: C
NEW QUESTION 109
Synchronous mirroring requires what type of connection between storage systems? (Choose the best answer.)
- A. iSCSI
- B. FC
- C. SAS
- D. InfiniBand
Answer: B
NEW QUESTION 110
To discover events that need to be reported to the storage administrator, which log does the Event Monitor poll?
- A. Array Profile
- B. Major Event Log
- C. Recovery Guru log
- D. ASUP log
Answer: B
NEW QUESTION 111
You are helping a customer diagnose a performance issue on an E-Series storage system. You decide to measure the amount of data that is being handled over the span of an hour.
In this scenario, what are you measuring?
- A. I/O alignment
- B. parity
- C. IOPS
- D. throughput
Answer: D
NEW QUESTION 112
Review the diagram.
Is this cabling correct or incorrect, and why? (Choose the best answer.)
- A. The cabling is incorrect because it uses the top-down bottom-up cabling method
- B. The cabling is incorrect because each controller goes to only one stack of disk shelves
- C. The cabling is incorrect because the controllers are cabled from the host port.
- D. The cabling is correct for the dual stack cabling method
Answer: D
NEW QUESTION 113
A host is unable to access volumes as shown in the exhibit.
Which statement is correct in this scenario?
- A. A volume has not been added in SANtricity System Manager.
- B. A host has not been added in SANtricity System Manager.
- C. A workload has not been added in SANtricity System Manager.
- D. A pool has not been added in SANtricity System Manager.
Answer: B
NEW QUESTION 114
Exhibit:
Referring to the exhibit, a customer needs to verify the power draw for the uninterruptible power supply (UPS) that is supporting ten E2824 shelves in a cabinet connected to a 100/110 volts power source.
What is the power draw in amps for the UPS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 115
What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)
- A. online database requiring the controllers to access the internet to activate features
- B. key file obtained from vendor and passed to system via SANtricity
- C. small toggle switches on the controller boards inside the system
- D. special USB flash drive that must be inserted into the controllers
- E. simple password system
Answer: B
NEW QUESTION 116
......
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
Get NS0-516 Braindumps & NS0-516 Real Exam Questions: https://lead2pass.real4prep.com/NS0-516-exam.html