Different versions suit different routines, and the content never changes between them. PDF for paper, the Windows engine for simulation, the online version for any browser — pick per mood, not per compromise.
Huawei H12-261 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Advanced OSPF | 20% | - OSPF protocol principles and mechanisms
|
| Topic 2: Routing Control & Policy | 10% | - Filtering tools: ACL, IP-prefix list, route-map - Route redistribution and path control |
| Topic 3: BGP Routing Protocol | 22% | - Path attributes and route selection rules - BGP session establishment and configuration - BGP route control and policy application |
| Topic 4: Advanced Switching Technologies | 12% | - Eth-Trunk, iStack, CSS - VLAN, QinQ, MUX VLAN - STP/RSTP/MSTP and protection mechanisms |
| Topic 5: MPLS & MPLS VPN | 8% | - MPLS forwarding principles and label distribution - MPLS VPN architecture and deployment |
| Topic 6: QoS & Security | 6% | - Congestion management and avoidance - Routing security and filtering - Traffic classification, policing, shaping |
| Topic 7: IS-IS Routing Protocol | 12% | - IS-IS basic architecture and principles
|
| Topic 8: IP Multicast | 10% | - IGMPv1/v2/v3 and IGMP Snooping - PIM-DM, PIM-SM and MSDP |
Huawei HCIE-Routing & Switching (Written) Exam: Three Versions, Zero Worries
Three versions of the same study materials: a printable, expert-prepared PDF with free demo download and instant access; a Desktop Test Engine for Windows with customizable simulation and timed modes that works offline; and an Online Test Engine for any browser on Windows, Mac, Android, and iOS with test history and performance review. All 498 practice questions are identical across versions. Every purchase includes 365 days of free updates, a 50% renewal discount afterward, and unlimited computer installations.
The Huawei HCIE-Routing & Switching (Written) exam requires 600/1000 to pass, and registration costs $300 USD. A failed attempt means paying the same fee again — a readiness check with the Real4Prep engines before booking is the cheaper option.
The H12-261 exam is a Huawei certification exam validating the Huawei HCIE-Routing & Switching (Written) syllabus shown above. It belongs to these credential paths: HCIP-Routing & Switching, HCIE-Routing & Switching (Lab). Candidates in 2026 start with Real4Prep's 498 practice questions, available as a printable PDF, a Windows Desktop Test Engine, and an Online Test Engine — three versions of the same materials.
Real4Prep issues a full refund if you take the Huawei HCIE-Routing & Switching (Written) exam within 60 days of purchase and do not pass. The policy does not apply if the exam is taken within 3 days of purchase, if the exam was never actually taken, or to free materials or expired orders, and the candidate name must match the payer name. Submit a scan of your enrollment slip and the official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Alternatively, exchange for two free exam products of equal value and keep your original update service. Orders arrive by email within 1 minute — contact support if nothing arrives within 2 hours.
The official Huawei HCIE-Routing & Switching (Written) outline defines 8 domains. The leading three are IP Multicast (10%), IS-IS Routing Protocol (12%), and Routing Control & Policy (10%). The full list is in the topics section above, and Real4Prep's 498 practice questions cover each one.
No mandatory prerequisite, but HCIP-Routing & Switching knowledge and 3–5 years enterprise network experience recommended; written exam must be passed before attempting lab exam Since requirements change over time, confirm the latest on the official Huawei exam page before scheduling.
The Huawei HCIE-Routing & Switching (Written) exam contains 60 to complete within 90 minutes. Timed simulation in the Real4Prep Desktop Test Engine teaches that rhythm before exam day does.
Huawei recommends these training resources for the Huawei HCIE-Routing & Switching (Written) exam:
Follow the training with steady self-testing — the 498 practice questions from Real4Prep help you apply theory and fill any gaps the training leaves.
Computer-based proctored exam at authorized Pearson VUE test centers Register for the Huawei HCIE-Routing & Switching (Written) exam through these official channels:
After booking, Real4Prep delivers your practice questions within 1 minute — preparation starts the same day.
Huawei HCIE-Routing & Switching (Written) Sample Questions:
If the router only needs to forward IPv6, IPv4 packets, then there is no need to configure any of these and address protocols on the router.
- A. False
- B. True
Correct Answer: B 🗳️
ISIS DIS DIS ?( ) will access the election in the broadcast multiplex network. The following is correct.
- A. DIS CSNP is sent periodically to send messages to keep the data synchronization certificate
- B. ISIS DIS MAC is better than the first-ranked election. If it is consistent, it is better than the priority.
- C. Accessing the network in a broadcast multiplex network, sending DIS Hello PDUs at a rate of three times
- D. DIS DIS LSP support occupies the function, the new one occupies the success, does not need to flood any text
Correct Answer: A,B,C 🗳️
The function of the HoP Limit field in an IPv6 header is similar to the function of which field in an IPv4 header?
- A. Flags
- B. Identification
- C. Time to Live
- D. Protocol
Correct Answer: B 🗳️
The following correct method is OSPFv3 LSA, said
- A. When the Intra-Area Prefix LSA Referenced Link State Type-2, Referenced, the Link State id DR id contains the interface
- B. Inter-Area Prefix-LSA Link State id, contains the preceding information
- C. Inter-Area-Prefix LSA Link-Local also contains information
- D. Router-LSA Network-LsA and does not contain routing information
Correct Answer: A,D 🗳️
The following is true about the arm echo function method. There is a BFD ( ) single statement.
- A. BFD BFD Single Device The arm echo function is available for one support and the other does not support the scene.
- B. BFD IP 224.0.0.184 Single Protocol Report The purpose of the arm echo function is
- C. BFD single must be identified. Remote identification. The arm echo function must be configured with local symbols and terminators.
- D. BFD BFD IP IP After the one-arm echo function is enabled, the destination report of the text is the same as the source.
Correct Answer: A,D 🗳️
Viewing page 1 out of 100 pages.
Viewing questions 1-5 out of 498 questions.
